Audiotec Fischer aMI measurement interface viewed at an angle
Audiotec Fischer aMI measurement interface viewed at an angle
Audiotec Fischer aMI measurement interface microphone and signal input panel
Audiotec Fischer aMI measurement interface microphone and signal input panel
Audiotec Fischer aMI measurement interface output and USB connection panel
Audiotec Fischer aMI measurement interface output and USB connection panel
Audiotec Fischer aMI interface and accessories in an open carry case
Audiotec Fischer aMI interface and accessories in an open carry case
Click to open expanded view

Audiotec Fischer AMI, Audio Measurement Interface

SKU: AMI
Price
$350
Inc. GST. Most orders ship Australia wide for a flat $15.95. Larger or heavier items may cost more.
Buy now, pay later
  • image
  • image
  • image

Not on our shelf right now. We order this one in from our supplier.
Shipping information

Australia wide flat rate shipping is $15.95. Larger or heavier items may cost more; we will confirm when your order is processed. In stock items are dispatched within 1 to 2 business days. Report transit damage within 24 hours with photos so we can lodge a freight claim.

Share this product

Share Post Pin E-mail
Audiotec Fischer aMI measurement interface viewed at an angle

Audiotec Fischer AMI, Audio Measurement Interface

$350

Product features

Guessing at factory EQ or speaker timing makes tuning harder. Audiotec Fischer AMI is measurement equipment for electrical and acoustic analysis. Check the software and connection details below when planning your DSP tuning setup.

What it does

  • Microphone input compatible with all condenser microphones, featuring adjustable gain and phantom power
  • Line input with adjustable sensitivity (max. 1 V or 40 V) for low and highlevel signal analysis
  • Stereo signal output with RCA and optical digital outputs for direct playback into a DSP
  • Loopback functionality for phase response and other advanced measurement tasks
  • USB powered operation, no external power supply required
  • Optimised for Audiotec Fischer´s DSP PC-Tool Seamlessly integrates for precise analysis and tuning
  • Works with AISA (Advanced Signal Input Analyzer) to detect and correct factory installed allpass filters, time alignment and equalisation in DSP input signals
  • Compatible with RTA (Real Time Analyzer) for accurate frequency response measurements and automatic equalisation using the proprietary TuneEQ algorithm

Specifications

  • Brand: Audiotec Fischer
  • Distributor product code: AMI
  • Product: Audiotec Fischer AMI, Audio Measurement Interface
Inputs 1 x Microphone input 1 x Line input
Microphone input specification
Frequency response 12 Hz to 44 kHz (±1 dB)
Dynamic range 95 dB (A weighted)
Input sensitivity 5 to 200 mV
Phantom power Yes (24 Volts)
Line input specification
Frequency response 8 Hz to 44 kHz (±1 dB)
Dynamic range 101 dB (A weighted)
Input sensitivity max. 1 V / max. 40 V
Input impedance 10 kOhms
Outputs 2 x Line output 1 x Optical output (SPDIF)
Line output specification
Frequency response 7 Hz to 44 kHz (±1 dB)
Dynamic range 100 dB (A weighted)
Maximum output voltage 900 mV (RMS)
Minimum load 5 kOhms
Loopback function Yes
General specification
Audio sampling rate 96 kHz / 32 Bit
USB power consumption max. 250 mA
Supported operating systems Windows, macOS, iOS and Android

Fitment and compatibility

DSP PC-Tool 6

DSP PC-Tool 5

DSP PC-Tool 4

Check the exact model and connection on the equipment you are using. A similar looking port or model name does not confirm compatibility.

In the box

Listed by the manufacturer:

  • 1 x AMI (Audio Measurement Interface)
  • 1 x 3.0 m / 9.85’ USB-C to USB-C cable with USB-A adaptor
  • 1 x RCA to Highlevel adaptor
  • 1 x 16 GB USB 3.0 flash drive with DSP tuning tracks

Installation

Have a qualified car audio installer check the mounting, wiring and system setup before fitting. Frankies workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on installation.

Warranty

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms that apply to this model.

Questions and answers

What am I buying?

Audiotec Fischer AMI, Audio Measurement Interface. Check the specifications and selected option above for the version supplied.

What equipment is it compatible with?

DSP PC-Tool 6 DSP PC-Tool 5 DSP PC-Tool 4

What is supplied?

The manufacturer lists 1 x AMI (Audio Measurement Interface), 1 x 3.0 m / 9.85’ USB-C to USB-C cable with USB-A adaptor, 1 x RCA to Highlevel adaptor, 1 x 16 GB USB 3.0 flash drive with DSP tuning tracks.

What should I check before installation?

Check the exact equipment model, the relevant dimensions and connections, and any extra parts listed above. Ask your installer to confirm the full system before fitting.

Can Frankies help me check the right version?

Yes. Contact us with the model you are ordering and the equipment or vehicle application so we can check the relevant details.

What warranty applies?

Your purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms for this model.