Aerpro CHLR8C Steering Wheel Control Interface to Suit Landrover Range Rover

Aerpro SWC Harnesses Connect OEM Steering Wheel Controls to Aftermarket Headunits

The Aerpro CHLR8C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls. Engineered to suit Landrover Range Rover Vogue (2006-2009) models with OEM MOST 25 Fibre Optic Amplified Systems and Touch Screen Display, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required. Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket headunit and the Aerpro Steering Wheel Control Interface. This interface is CANBUS & Fibre Optic compatible and provides various outputs including Reverse Trigger, Park Brake, Speed Pulse, Illumination and Amp Remote. It has also been designed specifically to retain the OEM MOST 25 Fibre Optic Amplified System in the vehicle.

Please Note:

• Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
• A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (sold separately).
• Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
• To maintain OEM MOST 25 Fibre Optic Amplified System, the aftermarket headunit requires RCA pre-outs.
• Suits Facelift Vehicles, with touch screen Only.
• If the factory unit has a CD stacker, this needs to remain connected to maintain the MOST loop.
• Remove the cable from the OEM display and replace it with the included
• MOST loop (orange wire) to reroute the signal.

Features:

• Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
• Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
• Retains the MOST 25 OEM Amplified System in the vehicle (the aftermarket headunit requires RCA pre-outs)
• CAN-BUS & Fibre Optic integration compatible, no additional modules required
• Provides output feeds for reverse trigger, park brake, speed pulse, illumination and amp remote
• Fitted with a vehicle specific plug, no cutting of wires required
• Recommended to be installed with an Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead (sold separately)
• Requires SWC patch lead to provide compatibility with the aftermarket headunit (sold separately)

Specifications:

• INTERFACE TYPE: CANBUS
• PATCH LEAD TYPE: C
• PHONE BUTTON COMPATIBILITY: NO
• VOICE ASSISTANT BUTTON SUPPORT: NO
• OUTPUTS:
  • REVERSE TRIGGER: YES (PURPLE/WHITE)
  • PARK BRAKE: YES (GREEN)
  • SPEED PULSE: YES (PINK)
  • ILLUMINATION: YES (ORANGE)
  • AMP REMOTE: YES (BLUE)
  • TELEPHONE MUTE: NO
• OTHER RETENTION:
  • OEM AMPLIFIED SYSTEM: YES FIBRE OPTIC MOST 25

NOTES:

• Aftermarket headunit must be SWC compatible.
• SWC patch lead is also required to enable SWC (sold separately).
• To maintain OEM MOST 25 Fibre Optic Amplified System, the aftermarket headunit requires RCA pre-outs.
• Suits Facelift Vehicles, with touch screen Only.
• If the factory unit has a CD stacker, this needs to remain connected to maintain the MOST loop.
• Remove the cable from the OEM display and replace it with the included
• MOST loop (orange wire) to reroute the signal.