Audison BITONEHV 13 Channel Stand Alone Digital Signal Processor (BIT ONE HD VIRTUOSO)

Description

Holds Absolute Mastery of the Instrument & the Technique Connected to It!

Digital Signal Processor
Just as the virtuous performer holds absolute mastery of the instrument and the technique connected to it, the BitOne HD Virtuoso features unique skills dedicated to the most ambitious OEM Integration projects and excels in uncompromising Hi-End systems. This was made possible thanks to innovative functions born with the new software/firmware development and the upgrade of some key components in the audio signal path, which are crucial to reach new heights of listening pleasure.

BitOneHD Virtuoso allows the creation of an Audison FULL DA HD (Full Digital Audio HD) system where the audio signal is transmitted digitally from the Hi-Res audio player to the Audison amplifiers equipped with AC / AD link inputs, preserving every nuance with maximum purity.

Features:

• Full DA HD
  Pure digital signal transfer with a resolution up to 24 bit / 96 kHz
• Hi-Res audio
  According to the definition of HiRes audio provided by JAS (Japan Audio Society – jas-audio.or.jp), bit One HD Virtuoso meets 24 bit / 96 kHz native processing requirement
• ANALOG DEVICE SHARK DSP
  Analog Device SHARC series chip with floating point precision, to reach the highest audio quality
• FIR FILTERS
  A dedicated firmware release enables the user to process up to 9 digital channels with crossover FIR filters. This sound processing mode, much more demanding in terms of calculation resources, ensures a leading edge in-car listening experience
• RVA (Remote Volume Aux)
  This exclusive technology provides the ability to select an auxiliary source (I.e. a HI-Res audio player or auxiliary wireless interface connected by digital inputs) and adjust its volume via the OEM Head Unit, offering full support to the management of the car priority signals such as parking sensor alerts, GPS messages, phone, and vocal commands whilst music is played through the auxiliary source
• USS technology
  USS technology allows bit processors to work with headunits featuring the “speaker load detection” circuit
• BIT DRIVE
  Auto tuning by Audison bit Tune and communication with bit Drive portal
• DE-EQ
  De-equalization function to flatten any equalization applied by default by OEM sources
• DE-TIME
  Input delay compensation of time-delayed factory outputs prior to signal summing.
• DE-PHASE
  Compensation of the overall system phase to recreate the original signal, even in the case of OEM sound enhancement algorithms
• POLARITY-CHECK
  High-level inputs polarity check and automatic correction in case of inversion

Specifications:

Power Supply

• Nominal power supply voltage / Fuse: 11 – 15 VDC / 2A
• Pulse operating voltage: 6.5 – 17 VDC
• Idling current: 0.75 A
• Switched off without DRC MP: 2 mA
• Switched off with DRC MP: 5 mA
• Remote IN: 4 – 15 VDC (1 mA)
• Remote OUT: 4 – 15 VDC (130 mA)
• ART – Automatic Remote Turn on/off from OUTPUT BTL speakers: 1.5 – 7 VDC

Signal Stage

• Distortion – THD @ 1 kHz, 1 VRMS Output: 0.004 %
• Bandwidth @ -3 dB: 10 Hz – 44 kHz
• S/N ratio @ A weighted, 4 V Output, 2 V MASTER input: 104 dBA
• S/N ratio @ A weighted, 4 V Output, 2 V AUX input: 105 dBA
• S/N ratio @ A weighted, 4 V Output, OPTICAL IN1/IN2 input: 110 dBA
• Channel Separation @ 1 kHz: 80 dBA
• Input sensitivity PRE IN / Master: 1.3 – 9 VRMS
• Input sensitivity Speaker IN / Master: 5 – 32 VRMS
• Input sensitivity AUX: 0.7 – 5 VRMS
• Input impedance Speaker In / AUX / Pre In: 15 k OHM (Pre IN / AUX) 5 OHM (Speaker IN)
• Max Output Level 0.1% THD: 4 V

Input Stage

• Low level (Pre): Ch1 – Ch6; AUX L/R
• High Level (Speaker In): Ch1 – Ch12
• Digital: 2 x Optical S/PDIF; Max 192 kHz/24 bit

Output Stage

• Low level (Pre): Ch1 – Ch13 (IIR mode); Ch1 – Ch 9 (FIR mode)
• Digital AD Link 1: Ch1 – Ch8 (IIR / FIR mode)
• Digital AD Link 2: Ch9 – Ch13 (IIR mode); Ch9 only (FIR mode)

Connection

• From / To Personal Computer: 1 x micro USB
• To Audison Amplifiers: 2 x (AC Link / AD LINK) control bus
• To Audison DRC MP: 1 x AC Link

Crossover

• Filter type: Full / High-Pass / Low-Pass / Band-Pass
• Filter mode and slope:
  • Linkwitz @ 12 / 24 / 36 / 48 dB
  • Butterworth @ 6 / 12 / 18 / 24 / 30 / 36 / 42 / 48 dB
  • Bessel @ 6 / 12 / 18 / 24 / 30 / 36 dB
  • FIR @ 6 / 12 / 18 / 24 / 30 / 36 / 42 / 48 dB
• Crossover Frequency:
  • Lo-Pass: 0 – 44k Hz (1 Hz step)
  • Hi-Pass: 0 – 20k Hz (1 Hz step)
• Phase control: 0 / 180 DEGREE

Equalizer (10 Hz – 20 kHz)

• High Level Inputs (Speaker In): Automatic De-Equalization, Delay Compensation, All Pass Compensation, Polarity check
• AUX Input: Parametrics Equalizer: +12 dB – -15 dB; 10 poles FIR type
• OPTICAL IN1/IN 2 Inputs: Parametrics Equalizer: +12 dB – -15 dB; 10 poles FIR type
• OUTPUTS:
  • IIR mode: N.13 Parametrics Equalizers: +12dB – -15 dB; 13 poles
  • FIR mode: N.13 Parametrics Equalizers: +12 dB – -15 dB; 9 poles FIR type + 3 poles IIR type
• MAIN EQ:
  • Parametric Equalizer: +12 dB – -15 dB; 5 poles FIR type + 1 pole IIR type
• Dynamic Equalization: Self-adjusting System between low and high listening levels
• Bass Boost: Adjustable parametric pole (+/-12 dB; 10 – 500 Hz)

Time Alignment

• Distance: 1.4 – 756 cm / 0.6 – 297.7 inches
• Delay: 0 – 22 ms
• Step: 0.04 ms, 1.4 cm, 0.6 inch

General Requirements

• PC connections: USB 1.1 / 2.0 / 3.0 Compatible
• Software/PC requirements: Microsoft Windows (32/64 bit): XP, Vista, Windows 7, Windows 8, Windows 10
• Video Resolution with screen resize: min. 800 x 600
• Ambient operating temperature range: 0C to 55C

Size

• W (Width) x H (Height) x D (Depth) mm/inch: 148 x 43.6 x 233
• Weight kg/lb: 1.775 / 3.9