Out of Stock

Victron BPR048100400 Smart BatteryProtect 48V-100A

Name: Victron BPR048100400 Smart BatteryProtect 48V-100A
SKU: BPR048100400
Availability: OutOfStock

BRAND:

SKU: BPR048100400

99.5% Positive feedback

Consistently receives highest buyers ratings
Ships items quickly
Has earned a track record of excellent service

Description
VICTRON ENERGY BPR048100400 SPECS
Brand
Reviews (0)

Product Informations

Description
VICTRON ENERGY BPR048100400 SPECS
Brand
Reviews (0)

Description

Description

The Battery Protection From Victron Energy Have Been Designed to Be a True World-wide Product

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would
damage the battery) or before it has insufficient power left to crank the engine.
The Smart BatteryProtect can also be used as a system on/off switch. See manual for details.

Bluetooth: programming made easy
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).
If required, Bluetooth can be disabled.

A special setting for Li-ion batteries
In this mode the Battery Protect can be controlled by the VE.Bus BMS.
Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection
diagram in the manual.

Ultra-low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.
Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64 V.

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting
the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative
(minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect
threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Specifications:

Maximum cont. load current: 100A
Peak current: 250 A
Operating voltage range: 24 – 70 V
Current consumption BLE on When on: 1,9mA When off or low voltage shutdown: 1,7mA
Current consumption BLE on When off: 1,7mA When off or low voltage shutdown: 1,6mA
Alarm output delay: 12 seconds
Max. load on alarm output: 50mA (short circuit proof)
Load disconnect delay: 90 seconds (immediate if triggered by the VE.Bus BMS)
Default thresholds

Disengage:42V
Engage: 48V

Operating temperature range Full load: -40°C to +40°C (up to 60% of nominal load at 50°C)
IP rating

Electronics: IP67 (potted)
Connections: IP00

Connection: M8
Weight: 0,8kg 1.8 lbs
Dimensions (hxwxd): 62 x 123 x 120 mm

VICTRON ENERGY BPR048100400 SPECS

Victron Energy BPR048100400 Specs

Weight	1.3 kg
Dimensions	7 × 19 × 7 cm

Brand

Victron Energy: Powering a Sustainable Future with Innovative Energy Solutions

Victron Energy has established itself as a premier name in the power solutions industry, known for its robust, reliable, and cutting-edge energy products. Catering to a diverse market that spans marine, automotive, and renewable energy sectors, Victron Energy’s products are engineered to perform in the most demanding environments, ensuring that power is available when and where it’s needed most.

This comprehensive review explores the evolution of Victron Energy, its expansive product lineup, and the innovative technologies that underscore its commitment to quality and sustainability.

The Victron Energy Ethos: Reliability, Innovation, and Quality

Foundation and Global Impact

Since its inception, Victron Energy has been driven by a vision to create power solutions that combine technological innovation with dependability. Originating as a small Dutch company, it has grown into a global leader, with products sold in over 60 countries. Victron’s growth has been fueled by its reputation for products that provide uninterrupted power under the toughest conditions.

Core Values and Industry Influence

Victron Energy operates with a commitment to excellence, which is evident in every aspect of its business, from product design to customer service. The company values sustainability, aiming to reduce the ecological impact of its operations and products. Victron also influences the power solutions market by setting high standards in technology and reliability that others strive to meet.

Expansive Range of Victron Energy Products

Solar Power Solutions

Victron Energy is perhaps best known for its comprehensive range of solar power products, designed to offer efficient and reliable energy solutions:

Solar Charge Controllers: Victron’s solar charge controllers, including the innovative MPPT (Maximum Power Point Tracking) models, optimize the energy harvested from solar panels by adjusting the electrical operating point of the modules or array.
Solar Inverters and Inverter/Chargers: These devices convert DC power from solar panels or batteries into AC power that can be used by electrical appliances. Victron’s inverters are known for their robustness and efficiency, with models suitable for small residential systems to larger commercial installations.
Solar Panels and Kits: Offering high-efficiency solar panels and comprehensive solar kits, Victron makes it easy for customers to adopt renewable energy, whether for remote applications, residential, or commercial setups.

Battery Solutions

Understanding the critical role of storage in energy systems, Victron provides a variety of battery technologies:

AGM and Gel Batteries: Known for their reliability and durability, these batteries are suited for cyclic applications where regular deep discharging occurs, such as in mobile applications and for off-grid power.
Lithium Batteries: With a focus on high efficiency and longevity, Victron’s range of lithium batteries offers superior performance in energy density and weight, making them ideal for applications that require a lightweight, long-lasting power solution.
Battery Management Systems (BMS): These systems ensure the optimal use of the battery storage capacity and prolong the life of lithium batteries by protecting them from overcharging, deep discharging, and excessive current.

Power Inverters and Converters

Victron Energy’s inverters and converters are central to its lineup, providing essential conversion capabilities that are critical across various applications:

Pure Sine Wave Inverters: These inverters are designed for powering sensitive electronic equipment that requires high-quality AC power.
DC-DC Converters: These allow users to step up or step down DC voltages to different levels, which is particularly useful in automotive applications where different devices require different voltage levels.

Chargers and Accessories

Victron’s chargers ensure batteries are maintained at optimal levels:

Smart Chargers: Incorporating Bluetooth connectivity, these chargers allow for monitoring and adjustment via a smartphone app, ensuring that batteries are charged efficiently and safely.
Accessories: Victron offers a wide range of accessories, including monitoring tools, cables, and connectivity kits, to enhance the functionality and user-friendliness of its systems.

Innovation and Sustainability at Victron Energy

Research and Development

Victron Energy is committed to innovation, dedicating substantial resources to research and development. This investment in technology has led to numerous patents and innovations, particularly in the areas of solar energy harvesting, battery management, and power conversion.

Commitment to Sustainability

Victron Energy not only aims to provide products that enable the use of renewable energy but also practices sustainability in its manufacturing processes. The company strives to minimize waste and reduce carbon emissions, ensuring that its operations reflect its commitment to environmental stewardship.

Victron Energy’s Role in a Greener Future

Educational Initiatives and Community Involvement

Victron is active in educating both consumers and professionals about the benefits and applications of solar and battery-based power systems. Through workshops, training sessions, and online resources, the company spreads knowledge on sustainable energy solutions.

Pioneering Industry Standards

As a leader in the power solutions sector, Victron Energy has a significant influence on industry standards, pushing for innovations that increase efficiency, reliability, and accessibility in power technologies.

Conclusion: Empowering the World with Victron Energy

Victron Energy continues to lead and innovate in the energy sector, providing solutions that power a wide array of applications from residential to commercial, in the most remote and challenging environments. With a focus on quality, reliability, and sustainability, Victron is committed to empowering its customers and contributing to a more sustainable world. Through continuous innovation and a dedicated approach to sustainability, Victron Energy aims to maintain its position at the forefront of the global power solutions industry, ensuring reliable and efficient energy management for all its users.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Victron BPR048100400 Smart BatteryProtect 48V-100A”

Victron BPR048100400 Smart BatteryProtect 48V-100A

Description

The Battery Protection From Victron Energy Have Been Designed to Be a True World-wide Product

Victron Energy BPR048100400 Specs

Victron Energy: Powering a Sustainable Future with Innovative Energy Solutions