Mongoose MRC80 M80 Series Replacement Car Alarm Remote Control for M80S, M80G, M80i

Description

Remote Control for Mongoose M80 Models pre 2009 and MX750.

A New Remote Has to Be Memorized Into Your Security System for It to Operate. The Code Learning Instructions Can Be Found in Your Owners Manual or As Detailed Below.

To learn new remotes to M80 models:

1. Disarm by existing remote, or use the override
2. Open the drivers door and leave open
3. Turn the ignition ON/OFF 3 times – siren chirps
4. Press arm button on first remote (siren chirps)
5. Press arm button on second remote (siren chirps)
6. Repeat for any other remotes
7. Wait 10 seconds for learning process to complete

To learn MRC80 to MX750

1. Disarm by existing remote, or use the override
2. Ignition ON and press override button 4 times and hold down on 4th press (siren chirps after 3rd press)
3. Press arm button on first remote (siren chirps)
4. Press arm button on second remote (siren chirps)
5. Repeat for any other remotes
6. Release the override button and turn ignition OFF
7. NOTE: existing remotes must be re-learnt at the same time

If no remote button is pressed within 10 sec’s of entering learning mode, the system will exit. This procedure can be repeated for up to 4 remotes. Learning just one remote erases all previous. All existing remotes must be learnt at the same time.

Specifications:

• Compatible Products: M80S, M80G, M80i models only,