show / hide sidebar
Take home the gear you want right now with flexible repayment plans to suit your budget and lifestyle.
Victron ITR040362041 Isolation Transformer 3600W 115/230V
On sale now! off!
Information About This Item
Indispensable in Professional Marine Energy Systems
Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.
Safety and prevention of galvanic corrosion
The Isolation Transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarms.
Safety is taken for granted in case of a normal on-shore installation. A fuse will blow or a GFCI (Ground Fault Current Interrupter) will trip in case of a short circuit or current leakage to ground. Connecting the ground wire of the shore-side supply to the metal parts of the boat will result in galvanic corrosion (see below). Bringing only the live and neutral wire on board results in an unsafe situation because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat.
Galvanic corrosion occurs when two dissimilar metals in electrical contact are simultaneously exposed to an electrically conducting fluid. Seawater and, to a lesser extent, fresh water are such fluids. In general, the more active alloy of the couple corrodes preferentially while the less active (more noble) material is cathodically protected. The rate of galvanic corrosion is a function of several variables including area ratios, conductivity of the fluid, temperature, nature of the materials, etc.
It is a misunderstanding that galvanic corrosion occurs only in metal and aluminium hulls. In fact it can occur on any boat as soon as a metallic part (the shaft and propeller) is in contact with water. Galvanic corrosion will quickly dissolve your sacrificial anodes, and attack the shaft, propeller and other metal parts in contact with water as soon as the boat is connected to the shore-side supply.
It might therefore be tempting not to connect the ground conductor: this is however extremely dangerous because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat.
The best solution to avoid galvanic corrosion and at the same time prevent any unsafe situation is to install an Isolation Transformer to connect to the shore-side supply. The Isolation Transformer eliminates any electrical continuity between shore power and the boat. The shore power is fed to the primary side of the transformer and the ship is connected to the secondary. The Isolation Transformer completely isolates the boat from the shore ground. By connecting all metal parts to the neutral output on the secondary side of the transformer, a GFCI will trip or a fuse will blow in case of a short circuit.
Soft start is a standard feature of a Victron Energy isolation transformer. It will prevent the shore power fuse from blowing due to the inrush current of the transformer, which would otherwise occur.
It is also recommended, for optimal safety, to connect the secondary neutral of the transformer to ground when the boat is out of the water
- Input: 115 or 230 V
- Output: 115 or 230 V
- Frequency: 50/60 Hz
- Rating: 32 / 16 A
- Soft start: Yes
- Transformer type: Toroidal (low noise, low weight)
- Input circuit breaker: yes
- Material: aluminium (blue RAL 5012)
- Protection category: IP 21
- Weight: 23 Kg
- Dimensions (h x w x d), mm: 362 x 258 x 218
You may return most new, unopened items within 30 days of delivery for a full refund less a 20% re-stocking fee and any shipping costs which are unable to be retrieved. Frankies will pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
The balance of the refund will be issued as a store credit for purchase of your next product or paid directly back into your PayPal account. You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
To organise a return of an item, please contact the store the purchase was made from, either via phone, email or dropping into the store.
Frankies offer $9 FLAT RATE Australia-wide shipping, no matter the number of items however, some larger/heavier items may incur a higher fee which will be noted during the checkout procedure. Frankies do not ship to PO Boxes, Parcel Lockers or addresses outside of Australia