{"product_id":"audiotec-fischer-ami-tuning-kit-audio-measurement-interface-tuning-kit","title":"Audiotec Fischer AMI TUNING KIT, Audio Measurement Interface Tuning Kit","description":"\u003cp\u003eGuessing at factory EQ or speaker timing makes tuning harder. Audiotec Fischer AMI TUNING KIT is measurement equipment for electrical and acoustic analysis. Check the software and connection details below when planning your DSP tuning setup.\u003c\/p\u003e\u003ch2\u003eWhat it does\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStereo signal input with microphone and line input for all in one measurements\u003c\/li\u003e\n\u003cli\u003eMicrophone input supports all condenser microphones with adjustable gain and phantom power\u003c\/li\u003e\n\u003cli\u003eLine input with adjustable sensitivity for low and high level signals (max. 1 V or 40 V RMS)\u003c\/li\u003e\n\u003cli\u003eStereo signal output with RCA and optical digital outputs for direct playback into DSP systems\u003c\/li\u003e\n\u003cli\u003eLoopback functionality for advanced measurements, such as phase response analysis\u003c\/li\u003e\n\u003cli\u003eUSB powered operation, no external power supply required\u003c\/li\u003e\n\u003cli\u003eStudio grade condenser microphone with free field calibration files for 0° and 90°\u003c\/li\u003e\n\u003cli\u003eOptimised linear frequency response at 90° for precise in car measurements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Audiotec Fischer\u003c\/li\u003e\n\u003cli\u003eDistributor product code: AMI TUNING KIT\u003c\/li\u003e\n\u003cli\u003eProduct: Audiotec Fischer AMI TUNING KIT, Audio Measurement Interface Tuning Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAMI\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e1 x Microphone input 1 x Line input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMicrophone input specification\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e12 Hz to 44 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e95 dB (A weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput sensitivity\u003c\/td\u003e\n\u003ctd\u003e5 to 200 mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhantom power\u003c\/td\u003e\n\u003ctd\u003eYes (24 Volts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine input specification\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e8 Hz to 44 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e101 dB (A weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput sensitivity\u003c\/td\u003e\n\u003ctd\u003emax. 1 V \/ max. 40 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e10 kOhms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e2 x Line output 1 x Optical output (SPDIF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine output specification\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e7 Hz to 44 kHz (±1 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e100 dB (A weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum output voltage\u003c\/td\u003e\n\u003ctd\u003e900 mV (RMS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum load\u003c\/td\u003e\n\u003ctd\u003e5 kOhms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoopback function\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral specification\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio sampling rate\u003c\/td\u003e\n\u003ctd\u003e96 kHz \/ 32 Bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB power consumption\u003c\/td\u003e\n\u003ctd\u003emax. 250 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported operating systems\u003c\/td\u003e\n\u003ctd\u003eWindows, macOS, iOS and Android\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMicrophone\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransducer principle\u003c\/td\u003e\n\u003ctd\u003eCondenser (back electret)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating principle\u003c\/td\u003e\n\u003ctd\u003ePressure receiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20 to 20,000 Hz (50 to 16,000 Hz ± 1.5 dB), diffuse field equalized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolar pattern\u003c\/td\u003e\n\u003ctd\u003eOmnidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity (0 dB = 1 V\/Pa)\u003c\/td\u003e\n\u003ctd\u003e15 mV\/Pa (= minus 36.5 dBV) ± 1 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal impedance\u003c\/td\u003e\n\u003ctd\u003e160 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal load impedance\u003c\/td\u003e\n\u003ctd\u003e≥ 2.2 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum SPL (Sound Pressure Level)\u003c\/td\u003e\n\u003ctd\u003e122 dBSPL at f = 1 kHz, k = 1%, RL = 2.2 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to noise ratio (related to 1 Pa)\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 57 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA weighted equivalent noise level\u003c\/td\u003e\n\u003ctd\u003eApprox. 26 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e12 to 48 V phantom power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.9 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput\u003c\/td\u003e\n\u003ctd\u003eElectronically balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment and compatibility\u003c\/h2\u003e\u003cp\u003eDSP PC-Tool 6\u003c\/p\u003e\u003cp\u003eDSP PC-Tool 5\u003c\/p\u003e\u003cp\u003eDSP PC-Tool 4\u003c\/p\u003e\u003cp\u003eCheck the exact model and connection on the equipment you are using. A similar looking port or model name does not confirm compatibility.\u003c\/p\u003e\u003ch2\u003eIn the box\u003c\/h2\u003e\u003cp\u003eListed by the manufacturer:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x AMI (Audio Measurement Interface)\u003c\/li\u003e\n\u003cli\u003e1 x Beyerdynamic MM1 Microphone\u003c\/li\u003e\n\u003cli\u003e1 x Microphone holder for tripod\u003c\/li\u003e\n\u003cli\u003e1 x RCA to Highlevel adaptor\u003c\/li\u003e\n\u003cli\u003e1 x 16 GB USB 3.0 flash drive with DSP tuning tracks\u003c\/li\u003e\n\u003cli\u003e1 x 3.0 m \/ 9.85’ USB-C to USB-C cable with USB-A adaptor\u003c\/li\u003e\n\u003cli\u003e1 x 3.5 m \/ 11.50’ optical toslink cable\u003c\/li\u003e\n\u003cli\u003e1 x 3.5 m \/ 11.50’ mono RCA cable\u003c\/li\u003e\n\u003cli\u003e1 x 2.0 m \/ 6.56’ XLR microphone cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eHave a qualified car audio installer check the mounting, wiring and system setup before fitting. Frankies workshops at Albion Park Rail (02) 4257 2636 and South Nowra (02) 4423 5254 can quote on installation.\u003c\/p\u003e\u003ch2\u003eWarranty\u003c\/h2\u003e\u003cp\u003eYour purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms that apply to this model.\u003c\/p\u003e\u003ch2\u003eQuestions and answers\u003c\/h2\u003e\u003ch3\u003eWhat am I buying?\u003c\/h3\u003e\u003cp\u003eAudiotec Fischer AMI TUNING KIT, Audio Measurement Interface Tuning Kit. Check the specifications and selected option above for the version supplied.\u003c\/p\u003e\u003ch3\u003eWhat equipment is it compatible with?\u003c\/h3\u003e\u003cp\u003eDSP PC-Tool 6 DSP PC-Tool 5 DSP PC-Tool 4\u003c\/p\u003e\u003ch3\u003eWhat is supplied?\u003c\/h3\u003e\u003cp\u003eSee the In the box section above for the sourced parts and quantities. Check the selected variant and any separately required accessories before ordering.\u003c\/p\u003e\u003ch3\u003eWhat should I check before installation?\u003c\/h3\u003e\u003cp\u003eCheck the exact equipment model, the relevant dimensions and connections, and any extra parts listed above. Ask your installer to confirm the full system before fitting.\u003c\/p\u003e\u003ch3\u003eCan Frankies help me check the right version?\u003c\/h3\u003e\u003cp\u003eYes. Contact us with the model you are ordering and the equipment or vehicle application so we can check the relevant details.\u003c\/p\u003e\u003ch3\u003eWhat warranty applies?\u003c\/h3\u003e\u003cp\u003eYour purchase is covered by the Australian Consumer Law. Contact Frankies for the warranty terms for this model.\u003c\/p\u003e","brand":"Audiotec Fischer","offers":[{"title":"Default Title","offer_id":67935365202013,"sku":"AMITUNINGKIT","price":875.01,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/9528\/9437\/files\/AMI-Tuning-Kit.jpg?v=1794026853","url":"https:\/\/frankiesautoelectrics.com.au\/products\/audiotec-fischer-ami-tuning-kit-audio-measurement-interface-tuning-kit","provider":"Frankies Auto Electrics","version":"1.0","type":"link"}